Red Lion RLMPDP-KIT Drill Power Transfer Pump

The RLMPDP-KIT, designed for use with an electric hand drill, contains the RLMPDP pump, a 32-inch length of 3/4-inch garden hose, a 32-inch length of 1/4-inch O.D. tubing, and an adapter for the tubing. The pump is self-priming and connects to a 3/4-inch standard garden hose on the discharge port. If the tubing is used on the intake port, the garden hose can be used on the discharge port, but if the garden hose is used on the intake port, another garden hose will be needed on the discharge (not included). This device is ideal for removing oil, draining sinks, water heaters, aquariums, and other similar applications. The power of this pump is directly related to the power of the drill, and a 2500 RPM electric drill is recommended, as battery-powered drills may lose charging capabilities over time, affecting the pump's performance.

Designed for easy use, the RLMPDP-KIT is intended for use with an electric drill 2500 RPM or greater, as a lower speed will reduce the pump's performance. It attaches to the drill and connects to a standard garden hose or tubing. This cost-effective device is ideal for removing oil from lawn mowers, draining sinks, dishwashers, water heaters, aquariums, or other shallow areas, but should not be used for transferring fuel.

The kit includes a 32-inch length of garden hose, a 32-inch length of 1/4-inch O.D. tubing, and an adapter for the tubing. If the garden hose is used on the inlet, a hose for the discharge is needed (not included). To assemble, attach the pump like a drill bit, install the adapter, add the tubing to the inlet, and the hose to the discharge, then start the drill in the forward position at full speed.

The pump's performance is directly related to the speed of the drill, with a recommended drill speed of 2500 RPM. At this speed, the flow rate is 154 GPH. However, battery-operated drills may lose power over time, potentially affecting the pump's performance.

product information: